H.323 Mode Parameter; Usesip; Operating Parameters - Cisco ATA 186 Administrator's Manual

H.323 Mode Parameter

H.323 Mode Parameter
This section describes the UseSIP parameter, which is used to set the Cisco ATA to H.323 mode if you
are using the H.323 signaling protocol.

UseSIP

Description
0—Use H.323 mode.
1—Use SIP mode.
Value Type
Boolean
Range
0 or 1
Default
0
Voice Configuration Menu Access Code
38

Operating Parameters

The parameters for configuring codecs, fax features and VLAN settings are included in this section:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
5-18
MediaPort, page 5-19
LBRCodec, page 5-19
AudioMode, page 5-20
RxCodec, page 5-21
TxCodec, page 5-22
NumTxFrames, page 5-23
CallFeatures, page 5-24
PaidFeatures, page 5-25
CallerIdMethod, page 5-26
Polarity, page 5-27
ConnectMode, page 5-28
TimeZone, page 5-29
NTPIP, page 5-30
AltNTPIP, page 5-30
DNS1IP, page 5-31
Chapter 5 Parameters and Defaults
OL-4008-01