Cfginterval; Encryptkey - Cisco ATA 186 Administrator's Manual

Parameters for Configuration Method and Encryption
Default
0
Voice Configuration Menu Access Code
905
Related Parameters
•
•

CfgInterval

Description
Use this parameter to specify the number of seconds between each configuration update. The Cisco ATA
will also upgrade its signaling image if it detects that the TFTP server contains an upgraded image.
For example, when using TFTP for configuration, the Cisco ATA contacts TFTP each time the interval
expires to get its configuration file.
You can set CfgInterval to a random value to achieve random contact intervals from the Cisco ATA to
the TFTP server.
Value Type
Decimal
Range
60 to 4294967295
Default
3600
Voice Configuration Menu Access Code
80002
Related Parameters
•
•

EncryptKey

Description
This parameter specifies the encryption key that is used to encrypt the Cisco ATA configuration file on
the TFTP server.
The cfgfmt tool, which is used to create a Cisco ATA binary configuration file (see the
EncryptKey Parameter and cfgfmt Tool" section on page
using the rc4 encryption algorithm, when the EncryptKey parameter has a value other than 0.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
5-6
UseTFTP, page 5-5
CfgInterval, page 5-6
UseTFTP, page 5-5
TftpURL, page 5-5
Chapter 5 Parameters and Defaults
3-11), automatically encrypts the binary file,
"Using the
OL-4008-01