Auto Provision Your Phone With Short Activation Code; Set A Password On Initial Phone Boot Up; Secure The Phone With A Cable Lock - Cisco 8800 Series User Manual

Auto Provision Your Phone with Short Activation Code

Auto Provision Your Phone with Short Activation Code
After your phone boots up, you see a welcome screen where you can enter the activation code. If you don't
have the activation code, contact your administrator.
Before you begin
Your administrator provides your activation code:
Procedure
Step 1 Press pound (#), and enter your activation code in the field that is provided on the Welcome screen.
Step 2
Press Continue.
The phone completes the provisioning process automatically.
Step 3
If an error message displays, enter the code again or contact your administrator.

Set a Password on Initial Phone Boot Up

The first time your phone boots up, you may be prompted to set a password. If you are not prompted, your
administrator has created a password for you.
Procedure
Step 1
Enter your password in the New password and Reenter new password fields.
Step 2 Press Save.

Secure the Phone with a Cable Lock

You can secure your Cisco IP Phone 8800 Series with a laptop cable lock up to 20 mm wide.
Procedure
Step 1 Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.
Step 2
Pass the lock through the looped end of the cable.
Step 3 Unlock the cable lock.
Step 4
Press and hold the locking button to align the locking teeth.
Step 5 Insert the cable lock into the lock slot of your phone and release the locking button.
Step 6
Lock the cable lock.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
16
Your Phone