Cisco 8800 Series User Manual page 180

Cisco Headset 531 and 532 LED and Buttons
The Cisco Headset USB Adapter is available for use with the Cisco Headset 531 and 532. With the adapter,
you can test your headset, and customize your bass and treble, gain or microphone volume, and sidetone or
feedback settings. The adapter also retains your settings if you switch between phones.
The Cisco USB adapter is supported on Cisco IP Phone 8851, 8861, and 8865 with Multiplatform Firmware.
To check your phone model, press Applications
field shows your phone model.
The Cisco Headset 530 Series require Multiplatform Firmware Release 11.1(2) or a later version. Upgrade
your phones to the latest firmware before using these headsets.
Cisco Headset 531 and 532 LED and Buttons
The Cisco Headset USB Adapter for Cisco Headset 530 Series is used for the basic call features.
Figure 7: Cisco Headset USB Adapter
The following table describes the Cisco Headset 531 and 532 USB Adapter buttons.
Table 12: Cisco Headset USB Adapter Buttons
Number Name
1
Mute button
2
Volume button (
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
166
Description
Toggle the microphone on and off. When Mute on the USB adapter is
enabled, the Mute
Adjust the volume on your headset.
and )
> Status > Product information. The Product name
button on the USB adapter lights up.
Accessories