Set Up A Vpn Connection From The Phone Web Page - Cisco 8800 Series User Manual

Settings
Procedure
Step 1
Press Applications
Step 2 Select Network configuration > VPN settings.
Step 3
Highlight Connect to VPN on bootup, press the Select button of the navigation cluster to select Off.
Step 4 Press Set to save the setting.
Step 5
Do one of the following actions:
• Highlight Enable VPN connection, select Off.
• Manually reboot your phone, see
The VPN disconnection takes about one minute.
After the phone reboots, the VPN connection icon
VPN connection is disabled successfully.
Step 6 (Optional) Check whether the VPN connection is
page

Set Up a VPN Connection from the Phone Web Page

You can set up a VPN connection from the phone web page.
You can do the same configuration on your phone, see
Procedure
Step 1 On the phone web page, select Voice > System.
Step 2
Under the section VPN Settings, set the parameters described in the following table.
Table 7: VPN Settings
Parameter
VPN Server
VPN User Name
.
Note Once you set Enable VPN connection to Off, the phone immediately tries to disconnect from
the VPN server. During the process, the phone reboots automatically.
128.
Set Up a VPN Connection from the Phone Web Page
Reboot Your Phone, on page
on the phone screen disappears. This means that the
. For details, see
Disconnected
Set Up a VPN Connection , on page
Description
IP address or FQDN of the VPN server.
Default: Empty
Enter a username for a credential user on the VPN
server.
Default: Empty
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
136.
View the VPN Status, on
125.
127