GE AquaTrans AT868 User Manual page 95

September 2004
Reassembling the Unit
(cont.)
7-6
Before powering up the AT868, make sure all the flat and
lock washers have been reinstalled. Washers or other
metal components left inside the enclosure may cause
electrical problems.
Note: Be sure to enter a complete and detailed account of any parts
replacement performed on the Model AT868 in Appendix E,
Service Record.
To purchase the parts mentioned in this chapter or any items not
specifically discussed, contact the factory for assistance. To make
sure the proper components are obtained, be sure to specify the serial
number of the Model AT868 at the time of purchase.
!WARNING!
Parts Replacement