GE AquaTrans AT868 User Manual page 136

September 2004
Setting Up the
Communications Port
(cont.)
F-4
4. Click on the "Communications Port" option to select it. The Setup
Communications screen appears similar to Figure F-3 below.
Figure F-3: Setup Communications Screen
5. Open the Protocol menu (the first of the drop-down menus) and
click on IDM.
6. Select any suitable available baud rate. A baud rate of 19,200 is
appropriate for almost all applications. However, if you
experience periodic communication reliability problems, you may
wish to consider lowering the baud rate on your instrument and in
PanaView™.
IMPORTANT:
Be sure all the communications port settings match
those made in setting up the meter's serial port.
7. Click on [OK] to complete data entry.
PanaView™ for IDM-Compatible Meters (916-086B)