Plotting Transducer
Signals
Saving Transducer Signals
Clearing Totalizers
PanaView™ for IDM-Compatible Meters (916-086B)
To plot the selected signal, click on Plot. A graphical window opens,
as shown in Figure F-12 below.
Figure F-12: Signal Graph Window
To save the raw signal, click Save. A window opens similar to
Figure F-13 below. Enter the desired name, and click Save to save the
signal as a text file.
Figure F-13: Save As Window
To clear the meter totalizers, click on the Clear Totalizers button in
the Properties window. The meter totalizers are reset to 0.
September 2004
F-11