GE AquaTrans AT868 User Manual page 145

Saving a New Site to the
Meter
Saving a Site to the PC
PanaView™ for IDM-Compatible Meters (916-086B)
To save a new site to the meter:
1. Select the radio button for New and click on the Save Site to Meter
button.
2. A window opens similar to Figure F-16 below. Enter the desired
name, and click [OK].
Figure F-16: Site Name Entry Window
3. The Site File Selection window (Figure F-15 on page F-12) opens.
Highlight a site with the desired settings, and click
PanaView™ saves the site in the meter with the new name and the
desired settings.
To save a site to the PC:
1. Highlight the desired site in the left pane. (See Figure F-14 on
page F-12.)
2. Click Save Site to PC. A window opens similar to Figure F-13 on
page F-11.
3. Enter the desired site name and click
site in the PanaView™ folder unless otherwise specified.
Note: If you have created a site on the meter after opening the Site
File Operations window, you must close and reopen the
window to click on the new site.
September 2004
[Open].
[Save]
. PanaView™ saves the
F-13