Replace An Fdap - Honeywell OW-FDAP31 Manual

6 FDAP MAINTENANCE AND TROUBLESHOOTING
7.1

Replace an FDAP

You can replace a failed FDAP with a new device only if the new device specification is identical to the failed
one. For more information about the procedure to replace an FDAP, refer to the Wireless Device Manager
User's Guide.
Attention
Any maintenance required is limited only to the external enclosure surface, cable connections, antennas, and the
firmware. A failed unit should be returned to Honeywell for maintenance, repair, or replacement.
www.honeywell.com
Figure 12: Maintenance icons