Table of Contents
Advertisement
3 FDAP INSTALLATION
3.14
Power on and startup for FDAP1/FDAP2
The FDAP1/FDAP2 has status LED's to indicate the various stages of operation.
The following table identifies the LED's and describes the operating conditions of the unit when the LED's are
turned ON.
LED
Power LED (Green)
Status LED/Heart Beat LED (Green)
Comm LED (Green)
38
www.honeywell.com
Figure 9.2: LED indicators
Table 3.2: LED indicators
Description
Indicates that the power is supplied to
FDAP1/FDAP2
the
is powered ON, Power LED turns ON
automatically.
Indicates the software status of
Status LED blinks ON/OFF once every second to indicate that the
FDAP1/FDAP2
factory firmware is in the working condition.
Indicates the Ethernet link activity.
•
The LED is steady when there is a valid Ethernet link but no data
activity.
•
The LED blinks when there is data activity on the Ethernet link.
FDAP1/FDAP2
. When
FDAP1/FDAP2
factory image. The
Hide quick links:
Advertisement
Table of Contents
