Table of Contents
Advertisement
4 FDAP CONFIGURATION
3.
On the Property Panel, expand Register Configuration.
4.
Configure the following under each Register Config:
•
•
•
•
5.
Click Apply.
To view the configured Modbus Registers
1.
On the Selection Panel, select Modbus Register Values.
2.
On the Property Panel, expand Register Values.
3.
Now, you can view the respective register values as shown below.
52
www.honeywell.com
Slave Addr: Slave Address
Register Addr: Register Address
Function: Select required function option from the dropdown list.Options include: Input Register,
Holding Register, Coil and Discrete Registers.
Data Type: Select required datat type option from the dropdown list. Options include: INT16, INT32,
UINT16, UINT32, Float and Boolean.
Hide quick links:
Advertisement
Table of Contents
