Verify Connectivity Using Maps - Honeywell OW-FDAP31 Manual

5 FDAP MONITORING
6.2

Verify connectivity using maps

The OneWireless user interface enables you to create multiple locations and upload site map to the location.
You can position the devices on the map to reflect the physical design and structure of your plant. You can
visually inspect network topology map and connectivity. You can navigate to the device in the topology map
and check the link signal quality and connectivity. In addition, you can examine device communication statistics
information like Receive Signal Quality Index (RSQI) and Receive Signal Strength Index (RSSI). This helps the
network services engineer to verify the wireless mesh connectivity and FDAP connectivity in the OneWireless
user interface.
Figure 11: Map view
For more information about setting up a monitoring area and for location specific monitoring, refer to the
Wireless Device Manager User's Guide.
63