Honeywell OW-FDAP31 Manual page 39

BLE Status LED (Green)
Comm LED (Green)
BLE Status LED provides the different states of BLE connection:
•
ALWAYS OFF - Advertisement off, controlled through WDM UI, typically
done when FDAP already joined the network.
• 10 seconds OFF, 1 second ON – FDAP Gen3 in advertisement mode, waiting
for connection from BLE Central (ex: Mobile App).
• 2 seconds OFF, 2 seconds ON – FDAP Gen3 is connected to BLE Central (ex:
Mobile App). NOTE: Only connected, not yet BONDED.
•
1 second OFF, 1 second ON - FDAP is bonded to BLE Central (ex: Mobile
App).
•
ALWAYS ON - FDAP is ready for secure data exchange with BLE Central
(ex: Mobile App).
•
And special case of BLE module firmware download, where LED is toggled
every 250ms (that is 250ms ON, 250ms OFF). NOTE: When BLE module
firmware download is in progress, connection to FDAP Gen3 by BLE Central
(ex: Mobile App) is not possible.
Indicates the RS485 port's activity.
•
The LED blinks when there is data activity on the RS485 port.
3 FDAP INSTALLATION
37