Connecting Modbus Tcp Devices To Fewio Device - Honeywell OW-FDAP31 Manual

5.4

Connecting Modbus TCP devices to FEWIO device

Aravind to provide image for Gen3
FDAP router Ethernet cable should be connected to Modbus Slave Ethernet port as shown below.
FDAP router Ethernet cable should be connected via a Cisco Switch, if you have multiple TCP Modbus
slaves as shown below.
Modbus Slave 2
Modbus Slave 1
Modbus Slave 0
Modbus Slave
+
+
CAT5E feed
568B
47