Establish Connection Between Wdm And Fdap - Honeywell OW-FDAP31 Manual

4 FDAP CONFIGURATION
4.1

Establish connection between WDM and FDAP

To establish connection between WDMA and FDAP, power on the FDAP and connect FDAP to the WDM
through FDN port of WDM. If you are using multiple FDAPs, you can use an Ethernet switch to connect the
FDAPs to the WDM. WDM enables you to commission, configure, and monitor the FDAPs connected to it
from a centralized location. All FDAP configuration parameters are easily accessible from the WDM, which
centralizes all key functions required to manage the field device network and wireless field devices.
Log on to the OneWireless user interface and configure the WDM using the First Time Configuration Wizard.
The First Time Configuration wizard appears only for the first log on. For more information about First Time
Configuration and OneWireless user interface details, refer to the Wireless Device Manager User's Guide.
32 www.honeywell.com