Honeywell OW-FDAP31 Manual page 46

4 FDAP CONFIGURATION
Panel
36 www.honeywell.com
Group elements
Uptime and Connectivity
Communication
Redundancy
ISA100 Protocol Version
Diagnostics
Network Time Protocol
Over-The-Air provisioning
WirelessHART Backward
Compatibility
Description
Displays the uptime and connectivity details,
which are as follows:
•
Uptime: Time (in seconds) during which
the device is online.
•
Restart Count: Number of times the
device is restarted. The Restart Count
begins from one when it is reset to
default.
•
Device Drop Off Count: Number of
times the device is disconnected from the
network.
•
Reset Statistics: Resets only the Device
Drop-off Count. Click to reset the Device
Drop Off Count.
Attention
When a device is reset to default
through a Provisioning Handheld
device, the Restart Count and Device
Drop-off Count are reset to 0.
Displays the Communication Redundancy
State, Communication Redundancy Ratio
details.
The Communication Redundancy State is
the redundancy communication link between
the primary and secondary parent.
Select the Comm Redun Alarm check box
to enable the "Non-Redundant
Communication" alarm for this FDAP.
Attention
This alarm is applicable only when the
FDAP is acting as an FDAP router.
Displays the supported version of
ISA100 protocol.
Displays the ISA100 Wireless radio
diagnostics details.
Displays the Time Master Preferred, Round
Trip Time, Time Sync Drift details.
Time Master Preferred: Time Master
preferred is set if the Node/Device is NTP
Sync capable or incapable.
Time Sync Drift: Time Sync Drift is the time
drift of the Node/Device from its Parent in
clock ticks.
Round trip time: The duration of the
response of the Ping from system manager.
Consists of the over-the-air provisioning
parameters for enabling and disabling over-
the-air provisioning. It also displays the time
remaining for over-the-air provisioning.
Check the Enable option if FDM supports
WirelessHART.