Installing the ONS 15454 M6 Shelf
NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Warning
The plug-socket combination must be accessible at all times because it serves as the main disconnecting
device. Statement 1019
Procedure
Step 1
Complete the necessary task as applicable:
•
•
•
•
•
•
Step 2
Complete the
Stop. You have completed this procedure.
DLP-G569 Install the AC Power Module in the ONS 15454 M6 Shelf
Purpose
This procedure installs the power modules in the ONS 15454 M6 system.
#2 Phillips screwdriver
•
NTP-G252 Install the ONS 15454 M6 Shelf , on page
•
NTP-G259 Open and Remove the Standard Door of the ONS 15454 M6
Shelf , on page
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, see the
for Cisco CPT and Cisco ONS
Required
Onsite
None
DLP-G569 Install the AC Power Module in the ONS 15454 M6 Shelf, on page 85
DLP-G757 Replacing 15454-M6-AC With 15454-M6-AC2 Power module, on page 88
DLP-G758 Replacing 15454-M6-AC2 With 15454-M6-AC Power module, on page 89
DLP-G570 Install the DC Power Module in the ONS 15454 M6 Shelf, on page 90
DLP-G737 Replacing 15454-M6-DC With 15454-M6-DC20 Power Module, on page 93
DLP-G738 Replacing 15454-M6-DC20 With 15454-M6-DC Power Module, on page 95
NTP-G256 Install Power and Ground to the ONS 15454 M6 Shelf , on page
This task installs the 15454-M6-AC or 15454-M6-AC2 power module in the ONS
15454 M6 system.
NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf
57.
Electrostatic Discharge and Grounding Guide
Platforms.
Installing the ONS 15454 M6 Shelf
24.
100.
85