Table of Contents
Advertisement
NTP-G258 Install the Standard Door of the ONS 15454 M6 Shelf
Figure 48: Installing the Standard Door
Step 2
Align the standard door hinges with the chassis hinges.
Step 3
Release the hinge pins.
Step 4
Pull the retention feature from the door (see
Step 5
Loosen the screws and place the mechanical stop on the retention feature. (See Diagram 1 of
Mounting the Mechanical Stop, on page
Step 6
Place the retention feature on the pin present on the chassis. (See Diagram 2 of
Mechanical Stop, on page
Step 7
Raise the door to slide the pin. (See Diagram 3 of
Step 8
Slide the mechanical stop to lock the door position and tighten the screws. (See Diagram 4 of
Mounting the Mechanical Stop, on page
Note
Installing the ONS 15454 M6 Shelf
54
55.)
Reinstall the door after installing all the other modules.
Figure 49: Mounting the Mechanical Stop, on page
55.)
Figure 49: Mounting the Mechanical Stop, on page
55.)
Installing the ONS 15454 M6 Shelf
55).
Figure 49:
Figure 49: Mounting the
55.)
Figure 49:
Advertisement
Table of Contents
