Table of Contents
Advertisement
DLP-G295 Install Alarm Wires in ONS 15454 M6
Onsite/Remote
Security Level
Caution
Always use the supplied ESD wristband when working with a powered ONS 15454 M6. For detailed instructions
on how to wear the ESD wristband, see the
Cisco ONS
Procedure
Step 1
Complete the
alarms.
Step 2
Complete the
external timing in ANSI.
Step 3
Complete the
external timing in ETSI.
Step 4
Complete the
connection.
Stop. You have completed this procedure.
Table 4: PIDs for SCSI Cables
Cable
SCSI alarm cable
SCSI alarm patch cable
SCSI alarm wire-wrap cable
Note
DLP-G295 Install Alarm Wires in ONS 15454 M6
Purpose
Installing the ONS 15454 M6 Shelf
128
Onsite
None
Platforms.
DLP-G295 Install Alarm Wires in ONS 15454 M6, on page 128
DLP-G296 Install Timing Wires on ONS 15454 M6 - ANSI, on page 133
DLP-297 Install Timing Wires in ONS 15454 M6 - ETSI, on page 134
DLP-G298 Install LAN Wires in ONS 15454 M6, on page 136
PID
15454-M-ALMCBL=
15454-M-AEXPCBL=
15454-M-ALMCBL2=
Some wire-wrap tools require a minimum of 24 AWG wires to prevent breakage. Ensure that the
SCSI alarm wire-wrap cable is used for 24 AWG wires. When the SCSI alarm wire-wrap cable is
used, the number of alarms is reduced as fewer strands of wire are supported compared to the SCSI
alarm and SCSI alarm patch cables.
Connector Details , on page 131
This task installs alarm cables on the ECU module of the ONS 15454 M6 to
provision external (environmental) alarms and controls.
Electrostatic Discharge and Grounding Guide for Cisco CPT and
Length
Wire Dimension
20 Meter
28 AWG
1 Meter
28 AWG
20 Meter
24 AWG
Table 6: SCSI Alarm Wire-Wrap Cable (15454-M-ALMCBL2)
lists alarm connector pin details for SCSI alarm wire-wrap cable.
Installing the ONS 15454 M6 Shelf
if you are provisioning external
if you are provisioning
if you are provisioning
to create an external LAN
Advertisement
Table of Contents
