Gsm Status Displays - Honeywell AlarmNet IGSMV Installation And Setup Manual

IGSMV / IGSMVCN Installation and Setup Guide

GSM Status Displays

[E]
5-2
Subnet Mask
xxx.xxx.xxx.xxx
Gateway IP Addr
xxx.xxx.xxx.xxx
DNS Serv IP
xxx.xxx.xxx.xxx
Encryption Test
AES Passed!
DHCP
OK
PriRSSI GPRS REG
-xxxdbm x x
Cntry Netw LAC
xxx xxx xxxxx
Cell BaseSt Chan
xxxxx x xxx
Second Site RSSI
-xxxdbm
Displays the 32-bit address mask used to indicate the portion
(bits) of the IP address that is being used for the subnet
address.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
Displays the IP address assigned to the Gateway.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
Displays the IP address assigned to the DNS (Domain Name
System) server.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
Performs a self-test of the AES encryption algorithm.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
DHCP (Dynamic Host Configuration Protocol) indicates
server is performing satisfactorily.
Press the [Space] key to go to the Physical Link display.
GSM Status Display Screen 1
PriRSSI – Primary Site RSSI level in dBm.
GPRS – GPRS Service availability where "x" can be:
"Y" if GPRS is available
"N" if GPRS is Not available
REG – Registration status from radio module where
"x" can be:
N – Not Registered
H – Registered Home
S – Searching
D – Registration Denied
R – Registered Roaming
? – Unknown Registration State
Press the [Space] key to go to the next screen.
Press the backspace [BS] key to go to the last screen.
GSM Status Display Screen 2
Cntry – Country Code
Netw – Network Code
LAC – Local area code
Press the [Space] key to get to the next screen.
Press the backspace [BS] key to go to the previous field.
GSM Status Display Screen 3
Cell – Base Station ID
BaseSt – Base Station Antenna Sector
Chan – Control Channel in use
Press the [Space] key to go to the next screen.
Press the backspace [BS] key to go to the previous field.
GSM Status Display Screen 4
Secondary GSM Site RSSI level in dBm.
Press the [Space] key to go to the GSM Status Display Screen
1.
Press the backspace [BS] key to go to the previous field.