Ek280 Archives Display; Progress Index - Honeywell Elster EK280 Applications Manual

EK280

2.2 EK280 archives display

To display the contents of an archive, move the cursor to the archive header and press the ENTER or
The Archive Headers are located on the
Status.
The archive data is displayed in table format, i.e. in columns with headings. Individual columns are separated
by one or more spaces. The column header contains the name of the value displayed in the column and
where applicable the unit. Space permitting, multiple columns are displayed simultaneously.
and ⊳ buttons move the cursor through adjacent columns, the cursor remains at the left column edge
The
and the columns are moved along in the display. The
entries (rows).
Archive view button functions in detail:
Move right one column. (The columns will be moved to the left by one column.)
After the last column the cursor returns to the first column.
⊳
Move left one column. (The columns will be moved to the right by one column.)
After the first column the cursor moves to the last column.
Move down one row. After the last row the cursor returns to the first.
Move up one row. After the first row the cursor moves to the last.
ENTER Archive search function input, see chapter 2.2.2, page 7.
The function is executed on the left-hand column.
ESC Exits the archive and returns to the archive header.
⊳ +
Goes to the archive entry point, i.e. the value at the top left of the table.
⊳ +
The LIS-address and OBIS code of the value is displayed.
The function is executed on the left-hand column.

2.2.1 Progress index

The progress index in comparison to each preceding archive entry is labeled with a "∆" after its name in the
table header (Example: see "Vn∆" in Figure1). They are shown in the display only, and not read out via the
interface.
Typically equal to the flow (consumption) progress index over a measurement period. This is however not
the case, where an archive row is added as a result of a specific event (i.e. resetting of the clock or gas
meter, display of an important status message) or if a data error is detected. Such an event is indicated as
follows:
Application Manual
Admin. and Serv.
Figure1: Progress index display in the archive
tabs under Archives, the log books also are under
and buttons move the cursor to older or newer
6
key.