Honeywell Elster EK280 Applications Manual page 36

Hide thumbs Also See for Elster EK280:

Table of Contents

EK280

6.2.3.2 Retrieving data with enSuite

If the communication link to the EK280 is via the optical interface, press the "Disconnect" or the

"Disconnect from all

EK280 and then wait for the "o" on the EK280 display to stop flashing.

Set up the modem communication link from enSuite to the EK280. (see chapter 3.2

communication link to EK280 via a

Once the communication link is set up, you can carry out checks, for instance view certain parameters

To do this press "Navigation" on the left-hand side of the enSuite window and then

online" in the bottom of the navigation window, then click on the plus sign next to "Parameter" and

then its subsections.

In enSuite press the "Disconnect" symbol or

Application Manual

devices" icon to terminate the communication link between enSuite and the

modem", page 9)

"Disconnect from all

"Setting up the

"Parameterize

devices" to end the test retrieval.

Table of Contents