Honeywell Elster EK280 Applications Manual page 32

EK280
• Screw the external antenna onto the
antenna adapter cable.
• Pull the external antenna cable back
outwards as far as possible, until the
antenna adapter cable is lying against the
inside of the cable gland.
• Now tighten the cable gland nut.
• Plug the antenna connector gently back into the modem.
• Close the housing cover and re tighten the screws.
• Finally, replace the cover strips on the housing.
CAUTION!
Damage to property caused by improper device closure!
If the device is not properly closed cables can get pinched and cause damage.
Therefore:
– Ensure correct positioning of the cable guide when closing.
Application Manual 30