NETGEAR ReadyDATA 5200 Software Manual page 64

The protocol buttons with a green LED are globally enabled; those with a black LED are
globally disabled. Click a protocol button to display the protocol settings screen.
2. Configure the protocol settings one protocol at a time as explained in the following sections.
Note: For information about the Replicate button (see the previous figure),
see Chapter 7, Backup, Replication, and
Configure SMB, AFP, NFS, or SSH
The only option for these protocols is to enable or disable the protocol globally:
1. Click the protocol button (SMB, AFP, NFS, or SSH).
2. Select the Enable check box to enable the protocol; clear the Enable check box to disable
the protocol.
3. Click Apply.
WARNING:
For SSH, if you enable SSH root access, NETGEAR might deny
you technical support. If you do enable SSH root access, the SSH
root password is identical to the administrator password that you
have configured.
ReadyDATA OS 1.2
Configure the System Settings
64
Recovery.