NETGEAR ReadyDATA 5200 Software Manual page 109

Item Description
Allowed Initiators Select one of the following radio buttons:
• Any. Access to the LUN group is granted to all initiators that have information
about the target address. (If CHAP authentication is enabled, access is dependent
on CHAP authentication.)
• Selected. Access to the LUN group is granted to iSCSI qualified names (IQNs)
only. (If CHAP authentication is enabled, access is dependent on CHAP
authentication.)
To add an IQN to the table and allow access to the LUN group:
1. Click the + button to the right of the empty table.
The Create initiator pop-up screen displays:
2. In the Name field, enter an IQN in the format as defined by RFC3720.
Allowed Initiators
For example, iqn.2012-04.com.netgear:sj-tst-5200:a123b456.
(continued)
3. Enter a CHAP password with a length of at least 12 characters.
4. Confirm the CHAP password.
5. Click Create.
The IQN is added to the table on the LUN Group Properties pop-up screen.
6. In the Allowed column of the table, select (that is, flag) the check box to allow the
initiator access to the LUN group.
To remove an IQN from the table:
1. Select the IQN by clicking it in the table.
2. Click the - button.
3. Confirm the removal.
To edit the CHAP password for an IQN in the table:
1. Select the IQN by clicking it in the table.
2. Click the wheel button.
3. Make the password changes
4. Click Apply.
By default, access to an initiator by a LUN in the LUN group is open. To require a LUN
in the LUN group to be authenticated before accessing an initiator, set a password for
bidirectional CHAP authentication.
Password for
bidirectional CHAP
Password
authentication
Confirm Password
ReadyDATA OS 1.2
Enter a CHAP password with a length of at least
12 characters.
Confirm the CHAP password.
Manage Shares and LUNs
109