NETGEAR ReadyDATA 5200 Software Manual page 56

9. Configure the IP settings as explained in the following table:
Item Description
IPv4 settings
Configure IPv4 From the drop-down list, select how IPv4 is configured:
•
•
IPv4 Address Enter the IPv4 address for the ReadyDATA 5200.
Subnet Mask Enter the subnet mask for the ReadyDATA 5200.
Router Enter the IPv4 address for the router through which the ReadyDATA
5200 connects to your network. The default setting is 192.168.1.1.
IPv6 settings
Configure IPv6 From the drop-down list, select how IPv6 is configured:
•
•
•
ReadyDATA OS 1.2
Using DHCP. The ReadyDATA 5200 functions as a DHCP client, and the IPv4
settings are automatically configured by a DHCP server on your network.
Manually. You need to enter the IPv4 address and subnet mask for the ReadyDATA
5200, and the router through which the ReadyDATA 5200 is connected to the
network.
Automatically. The ReadyDATA 5200 is configured with an IPv6 address through
stateless autoconfiguration without the requirement of a DHCPv6 server on your
network. The ReadyDATA 5200 does need to be connected to the Internet for
stateless autoconfiguration to function.
Using DHCP. The ReadyDATA 5200 functions as a DHCPv6 client, and the IPv6
settings are automatically configured by a DHCPv6 server on your network.
Manually. You need to enter the IPv6 address and prefix length for the ReadyDATA
5200, and the router through which the ReadyDATA 5200 is connected to the
network.
Configure the System Settings
56
Manual
configuration
only