Create A User Group - NETGEAR ReadyDATA 5200 Software Manual

Create a User Group


To create a user group:
1. Select Security.
The Security screen displays (see the figure in
2. Click the Groups button.
The following figure shows some examples. If you have not yet created any groups, only
the default group with the name users and group ID (GID) 100 displays.
3. At the top right of the screen, click the New Group button (
The New Group pop-up screen displays:
4. Configure the following settings:
• GID. Either leave the assignment of the group ID (GID) as Automatic, or enter a
custom GID. If you leave automatic assignment, GIDs are assigned in increments
of 2, starting with 102. That is, GIDs are assigned as 102, 104, 106, and so on.
• Name. Enter a name to identify the group.
5. Click Create.
The group is added to the table on the Security screen.
ReadyDATA OS 1.2
Manage User Groups and User Accounts
126
Step 2).
).