Reset The Firmware To Factory Defaults - NETGEAR ReadyDATA 5200 Software Manual

7. Click Reboot under the Update heading.
If you enabled email alerts, the ReadyDATA 5200 sends a message when the firmware
update finishes.
8. (Optional) Verify that the ReadyDATA 5200 runs the new firmware.
Select System > Overview > Hardware. The Dashboard home screen displays.
Check which firmware version is listed in the Firmware field.

Reset the Firmware to Factory Defaults

WARNING:
Resetting the ReadyDATA 5200 to factory defaults deletes not
only the configuration but also all stored data. Back up the stored
data if you intend to use it again.
ReadyDATA OS 1.2
System Maintenance and Monitoring
139