NETGEAR ReadyDATA 5200 Software Manual page 156

The following table explains the columns of the UPS table:
Item Description
Status The status of the UPS. These are the options:
•
•
•
•
•
•
Name The name of the UPS. For a remote UPS, the name is always UPS.
Description The description that you gave to the UPS.
Serial The detected serial number of the UPS.
Model The detected model of the UPS.
MFR The detected manufacturer of the UPS.
Address The IP address of the UPS.

To edit a UPS device in the UPS table:
1. In the UPS table, highlight the UPS device that you want to modify.
2. Click the gear icon to the right of the UPS table. The UPS Settings screen displays. The
fields on this screen are identical to the Add UPS screen (see the figures in
previous procedure).
3. Modify the settings as required. You cannot change the type settings.
4. Click Apply. The modified UPS settings are displayed in the UPS table.

To remove a UPS device from the UPS table:
1. In the UPS table, highlight the UPS device that you want to remove.
2. Click the - button to the right of the table.
3. Confirm the removal. The UPS device is removed from the UPS table.
ReadyDATA OS 1.2
On line power
On battery
Low battery
On battery and Low battery
On line power and Low battery
Unknown
System Maintenance and Monitoring
156
Step 2 of the