Add And Monitor Ups Devices - NETGEAR ReadyDATA 5200 Software Manual

ReadyDATA 5200
ReadyNAS
Figure 12. ReadyDATA 5200 with a UPS managed remotely over a remote ReadyNAS

Add and Monitor UPS Devices

You can add up to three UPS devices to Dashboard.

To add a UPS device to Dashboard and monitor the UPS device:
1. Select System > Settings > UPS.
The following figure shows the UPS screen with one UPS device already added:
2. Click the + button (
figure shows the settings for adding an SNMP UPS; the second figure shows the settings for
adding a remote UPS.
ReadyDATA OS 1.2
UPS power input
) to the left of the UPS table. The Add UPS screen displays. The first
System Maintenance and Monitoring
153
Switch
Remote UPS
Ethernet
Power
USB
Network