Manage Replication And Recovery Between Two Or More Systems; About Replication - NETGEAR ReadyDATA 5200 Software Manual


To clone a snapshot to become a new LUN and make that LUN available to
iSCSI-attached devices:
1. Clone a snapshot.
See Clone a Snapshot
2. Add the new independent LUN to a LUN group.
See Assign a LUN to a LUN Group
3. Initialize and format the new LUN to make it accessible as a new disk drive.
See Step 15 through
for an iSCSI-Attached Device
Manage Replication and Recovery between Two or
More Systems
•

About Replication

• Access ReadyDATA Replicate and Register Systems
• Schedule Periodic Replication
• Configure Continuous Replication
• Recover Data
• View the Network
• View the Jobs
• Monitor the Jobs
• Run Job Reports
The ReadyDATA 5200 supports backup and recovery operations through its advanced
snapshot functionality. For information about snapshots, see
and LUNs on page 158. Replication is specifically between two ReadyDATA 5200 storage
systems on which shares and LUN can be mirrored.
About Replication
Replication capabilities are integrated into the ReadyDATA 5200, and you do not need to
install a replication add-on. You can enable replication with the simple click of a button.
However, you do need to access the NETGEAR ReadyDATA Replicate™ software
application so you can use its centralized management console to configure the replication
settings (see Access ReadyDATA Replicate and Register Systems
ReadyDATA Replicate supports two types of replication:
• Periodic replication
This type of replication is driven by the clock. Data is replicated periodically, from once
ReadyDATA OS 1.2
on page 165.
on page 103.
Step 17 of the procedure in
on page 114.
Backup, Replication, and Recovery
173
Use an iSCSI Initiator to Set Up Access
Manage Snapshots for Shares
on page 174).