NETGEAR ReadyDATA 5200 Software Manual page 185

The first Continuous Replicate screen displays:
4. Configure the settings on the first screen as explained in the following table:
Item
Name
Replicate From
Save To
5. At the bottom right of the screen, click Next.
ReadyDATA OS 1.2
Description
Keep the default name for the replication schedule, or overwrite the default name
with another name.
From the Replicate From drop-down list, select the ReadyDATA 5200 from which
you want to replicate a share or LUN, that is, select the source system.
Then make the following selections:
1. Select the volume on which the share or LUN resides.
2. Double-click the volume.
3. Select the share or LUN.
From the Save To drop-down list, select the ReadyDATA 5200 to which you want
to replicate a share or LUN, that is, select the destination system.
Then select the volume to which you want to replicate the share or LUN.
Note: In the previous figure, the name of the volume to which the share or LUN
is replicated is identical to the name of the volume from which the share or LUN
is replicated. This is not a typical situation.
Backup, Replication, and Recovery
185