Figure 20 - 3-Wire Sensor - Honeywell 2MLF-RD4A User Manual

ATTENTION
•
•
ATTENTION
1*: If sensor and compensating wire are shielded, connect the shield line to
FG terminal of the module.
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
1*: If sensor and compensating wire are shielded, connect the shield line
to FG terminal of the module.
2*: If 2-wired sensor is connected; short the terminals B and b on the
terminal block of the module.
Figure 20 – 3-Wire sensor
Honeywell
3. Installation and Wiring
3.2. Wiring
43