Figure 76 - I/O Parameter Setting Window 2 - Honeywell 2MLF-RD4A User Manual

6. Programming
6.3. Application program
Scaled calculation:
where, Y: Scaling value, X: Temperature value.
However, the temperature value will be calculated and output in a format 10 times of
the actual temperature value.
2. In this case the filter value of CH0 and CH2 is set to '200', respectively, so as to
change the temperature value in stages against sudden change of the temperature.
3. It outputs information of setting error and disconnection to M0 and M10 and
outputs information of setting error details to P0012 in BCD with bit P00002 'ON'.
Program
120 Resistance Temperature Detector 2MLF-RD4A User's Guide
10000
Y X
= ( + 2000
10500
Figure 76 – I/O Parameter Setting window 2
Honeywell
)
,
September 2010
R200