Basic Program; Figure 71 - I/O Parameter Setting Window 1 - Honeywell 2MLF-RD4A User Manual

6. Programming

6.2. Basic program

6.2 Basic program
The operation condition of the internal memory of RTD input module are specified
below:
1. RTD module is installed on Slot No.2.
2. The number of I/O points assigned to RTD module is 16 when 'Assign fixed points
to I/O slot (64)' option in the basic parameter is not used.
3. The setting values specified through the 'I/O Parameter' window will be saved on
the RTD module when the parameters are downloaded and the module is initialized.
116 Resistance Temperature Detector 2MLF-RD4A User's Guide
Figure 71 – I/O parameter setting window 1
Honeywell
R200
September 2010