Rtd Module Hardware Error; Rtd Module Status Check Through Softmaster System Monitoring; Execution Sequence; Module Information - Honeywell 2MLF-RD4A User Manual

RTD module hardware error

When hardware error occurs in the RTD module, contact the nearest agency or service
center of Honeywell Co. Ltd.
It is necessary to do a status check before contacting the service agency. The status check
is done as described below:

RTD module status check through SoftMaster system monitoring

SoftMaster system monitoring function can be used to gather following data:
Module type
•

Module information

•
O/S version
•
Status of the RTD module.
•

Execution sequence

Two routes available for the execution are:
1. On the module screen, click Monitor > System Monitoring and right-click to
display Module Information.
2. On the module screen, click Monitor > System Monitoring > and double-click the
module screen.
Module information
Module Info: shows the information of the module presently installed.
1.
2. OS version: shows the O/S version information of RTD module.
3. OS date: shows the O/S prepared date of RTD module.
4. Module status: shows the present error code.
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
7.3. Troubleshooting procedures
Honeywell
7. Troubleshooting
135