Honeywell 2MLF-RD4A User Manual page 59

Step
1
Connect SoftMaster to PLC CPU (online status), click Monitor > Special
Module Monitoring to display Special Module List window as described in
figure below showing base/slot information, in addition, to special module
type. The module list dialog box displays the module installed on the present
PLC system.
2
Select the Special Module in the above figure and click Module Info to
display the information.
3
Click Monitor on the Special Module List window to display Special Module
Monitor window as in figure below, where four options are available, that is,
FLAG Monitor, Start Monitoring, Test, and Close. RTD module's temperature-
converted value and scaling value displays on the upper-half of the monitor
window and parameters items of respective modules are displayed for
individual setting at the lower-half of the test window.
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
4. Operation Setting and Monitoring
4.5. Special Module Monitoring
Action
Honeywell
59