Honeywell 2MLF-RD4A User Manual page 63

Step
6
Max/Min active: Click 'FLAG Monitor' to set Max/Min active of the RTD
module Enable and close the command window to monitor the
maximum/minimum temperature-converted value as shown below:
7
Close: Close is used for closing from the monitoring/test window. When the
monitoring/test window is closed, the maximum value, the minimum value
and the present value will not be saved.
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
4. Operation Setting and Monitoring
4.5. Special Module Monitoring
Action
Honeywell
63