Figure 46 - Averaging Value - Honeywell 2MLF-RD4A User Manual

When the average value is set through I/O Parameter window, the software does
3.
not allow for selection of values beyond the prescribed range. The specified value in
such a case is displayed in RED and also generates a resetting message.
R200 Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
5. Internal Memory Configuration and Functions
Figure 46 – Averaging value
Address
14 Channel 0 Average Value Setting
15 Channel 1 Average Value Setting
16 Channel 2 Average Value Setting
17 Channel 3 Average Value Setting
Honeywell
5.3. Operation parameters setting area
Description
95