4. Operation Setting and Monitoring
4.5. Special Module Monitoring
Test function of Special Module Monitor operates when the sequence program is stopped
and not available while in run mode.
Test function of Special Module Monitoring is provided for user to check without
sequence programming if the RTD module operates normally. If RTD module is to be
used for other purposes than test, use parameters setting function in I/O parameters.
4.5 Special Module Monitoring
The usage of Special Module Monitoring is described below.
Running Special Module Monitoring
Click Online > Connect and Monitor > Special Module Monitoring to run Special
Module Monitoring. If the status is not Online, Special Module Monitoring menu will
not be activated.
How to use Special Module Monitoring?
Perform the following steps to use Special Module Monitoring.
58
Resistance Temperature Detector 2MLF-RD4A User's Guide
Figure 24 – Monitor menu
Honeywell
R200
September 2010