Restore procedure: patient data
CAUTION
NOTE:
–
LOGIQ E9
User Guide
Direction 5454884-100 English Rev. 1
The restore procedure overwrites the existing database on the
local hard drive. Make sure to insert the correct media.
You cannot restore the data between systems with different
software versions.
1. Insert the media into the media drive.
2. On the Touch Panel, press Utility.
3. On the Utility Touch Panel, press System.
4. On the monitor display, select Backup/Restore.
The Backup/Restore screen is displayed.
If you are not logged in with administrator privileges, the
Operator Login window is displayed. Log on with
administrator privileges.
5. In the Restore list, select Patient Archive.
6. In the Media field, select the media.
7. Select Restore.
The system performs the restore. As it proceeds, status
information is displayed on the Backup/Restore screen.
Data Backup
3-33