3D Mode - GE LOGIQ E9 User Manual

Performing an Exam

3D Mode

3D Type
Easy 3D
Advanced 3D
Tru3D (Option)
Acquiring a 3D Scan
NOTE:
NOTE:
NOTE:
2-10
Table 2-5: 3D Package Options
Description
Designed for rendering
B Mode and Color Flow
Mode images, e.g.,
Baby Face scans.
Designed for rendering
B Mode and Color Flow
Mode images, e.g.,
vessel trees.
Designed for rendering
B Mode and Color Flow
Mode images, e.g.,
vessel trees.
To acquire a 3D scan,
1. Optimize the B-Mode image. Ensure even gel coverage.
2. Press the 3D control panel key. Two screens appear.
Set appropriate values for Acq Mode and Scan Plane. Also,
set the scan distance before scanning.
3. To start acquiring the image, press Start (Trackball key).
4. To perform a parallel scan, scan evenly. To perform a sweep
(fan) scan, rock the probe once. Note the distance of the
scan.
5. The 3D volume of interest (VOI) is dynamically assembled
on the right side of the screen.
If the image stops before you're done scanning, start
acquiring the 3D volume of interest again.
6. To complete the 3D scan, press End (Trackball key).
You can also press Freeze, but then you need to also press
the 3D key to obtain the final render.
Sensor/No Sensor
No sensor
No sensor
Sensor
LOGIQ E9
Direction 5454884-100 English Rev. 1
Available Tabs
3D Acquisition, Easy
3D, Movie
3D Acquisition, Easy
3D, Advanced 3D,
Movie
3D Acquisition, Easy
3D, Advanced 3D,
Movie, Tru3D
–
User Guide