When Moving The System - GE LOGIQ E9 User Manual

Getting Started

When moving the system

NOTE:
CAUTION
CAUTION
1-20
1. Always use the front handle grips to move the system.
2. Take extra care when moving the system long distances and
on inclines. Ask for help if necessary.
Avoid ramps that are steeper than ten degrees to avoid
tipping over the system. Utilize additional care and
personnel when moving on a steep incline (>5 degrees) or
loading the system into a vehicle for transport.
Wheel chair ramps are usually less than five degrees.
DO NOT attempt to move the console using any cables or
fixtures, such as the probe connectors.
3. Use the foot brake (pedal), located on the bottom of the
system in the front, when necessary.
4. Do not let the system strike walls or door frames.
5. Use extra care when crossing door or elevator thresholds.
6. Once the destination is reached, lock the wheels.
The system weighs approximately 140kg (309lbs). To avoid
possible injury and equipment damage:
• Be sure the pathway is clear.
• Limit movement to a slow careful walk.
• Use two or more persons to move the system on inclines or
long distances.
LOGIQ E9
Direction 5454884-100 English Rev. 1
–
User Guide