Operator Panel Movement Controls - GE LOGIQ E9 User Manual

Operator Panel Movement Controls

CAUTION
–
LOGIQ E9 User Guide
Direction 5454884-100 English Rev. 1
The system Operator Panel can be freely moved in all
directions. The vertical displacement of the Operator Panel is
motor driven. The control buttons are located adjacent to the
handles.
Figure 1-10. Operator Panel Movement Controls
To move the Operator Panel sideways, press and hold down the
left button to release and move the Operator Panel sideways
until it is in the desired position.
To park the Operator Panel, after moving Operator Panel
sideways to the desired position, release the left button. After
releasing the left button, the system will lock into position after 3
seconds.
To raise/lower the Operator Panel, press and hold down the Up/
Down toggle button (right button) accordingly to raise or lower
the Operator Panel. Release the Up/Down button when the Top
Console is in the desired height.
To manually adjust the Operator Panel, manipulate the metal
lever located in-between the slots on the rear of the LOGIQ E9.
When power is on, the brakes are applied to the Operator
Panel. To move the Operator Panel, release it by using the
Operator Panel Movement Controls. This helps to ensure the
life of the brakes.
Moving the System
1-21