Beginning An Exam; Scanning A New Patient - GE LOGIQ E9 User Manual

Getting Started

Scanning a New Patient

NOTE:
NOTE:
NOTE:
NOTE:
1-66

Beginning an Exam

1. Press Patient.
2. Press New Patient on the Patient menu.
3. If there are images on the clipboard, a pop-up menu
appears. Specify whether you want to store images
permanently, delete images, or go to active images.
4. Choose the exam category.
5. Verify the dataflow.
DO NOT use the removable media Dataflows on the New
Patient menu.
The system can display a warning dialog when the patient is
registered to "No Archive". If the "Warn register to No
Archive" preset is selected in the Utility -> Connectivity ->
Miscellaneous menu, a warning displays. A different
dataflow for permanent storage of patient data should be
selected.
6. Fill in patient information.
You can also select a patient from the patient database at
the bottom of the Patient menu if the patient has a patient
ID.
Columns drive the ordering of the patients displayed. The
column that you select drives the order of the displayed
patient database.
Do not use the following characters when filling in patient
information:
" ' \ / : ; . , * < > | + = [ ] &
7. Select Register.
8. Select the probe to start scanning (or select Exit, Esc, Scan,
or Freeze).
9. Perform the exam.
LOGIQ E9
Direction 5454884-100 English Rev. 1
–
User Guide