Table of Contents
Advertisement
Main Menu
Solenoid Test
1.
Disconnect the 3P connector of the reverse lockout
solenoid.
2.
Measure the resistance between No. 1 and No. 3
terminals.
If the resistance is not within the standard, replace
the reverse lockout solenoid.
3.
Test reverse lockout solenoid operation by connec-
tor battery power to the No. 1 terminal and ground
to the No. 3 terminal. A clicking sound should be
heard.
4.
If the reverse lockout solenoid no clicking sound is
heard, replace it.
Table of Contents
Solenoid Replacement
1.
Disconnect the 3P connector.
2.
Remove the reverse lockout solenoid from the trans-
mission.
3.
Remove the select lock pin and select lock return
spring.
4.
Install the reverse lockout solenoid in the reverse
order of removal.
Advertisement
Chapters
Table of Contents
