Table of Contents
Advertisement
Main Menu
Engine Removal/Installation
Removal (cont'd)
5.
Disconnect the fan motor connector, then remove
the engine room fan assembly (A/T).
6.
Remove the rear trim panels behind the passenger's
seat, then disconnect four connectors from the
engine control module (ECM) and three connectors
from the floor wire harness.
Table of Contents
7.
Disconnect the spark plug voltage detection module
connectors, ground cable and engine wire harness
clamps.
8.
Disconnect the fuel pump resistor connector.
9.
Disconnect the injector resistor connector and
ground cable (A/T).
Advertisement
Chapters
Table of Contents
