Honda NSX-T 1998 Manual page 866

Main Menu
Differential
Reassembly
1. Install the clutch disc, clutch plate, central gear, and
carrier assembly. Lubricate the clutch disc surface
with transmission fluid.
2. Install the final driven gear. Align the mark on the
differential housing cover with the mark on the final
driven gear.
Table of Contents
CARRIER ASSEMBLY
CENTRAL GEAR
CLUTCH PLATE
CLUTCH DISC
DIFFERENTIAL
HOUSING
COVER
FINAL
DRIVEN
GEAR
MARK
MARK
3. Install the 102 mm washer, clutch discs, clutch
plates, and 112 mm thrust shim. Lubricate the
clutch discs with transmission fluid. Position the
112 mm thrust shim with the thickness size mark
facing away from the clutch discs.
Thickness Size
Mark
CLUTCH PLATES
4. Install the 60 mm washer, spring plate, and stop
plate.
112 mm THRUST
SHIM
CLUTCH DISCS
102 mm WASHER
STOP PLATE
SPRING PLATE
60 mm WASHER
DIFFERENTIAL
HOUSING