Honda NSX-T 1998 Manual page 156

Main Menu
ABS Indicator Relay
Inspection
1. Check for continuity between terminals
There should be continuity.
2. Connect a 12 V battery across terminals
There should be no continuity between terminals
and
Table of Contents
Pulsers/Wheel Sensors
Inspection
1. Check the front and rear pulser for chipped or dam-
aged teeth.
2. Measure the air gap between the wheel sensor and
pulser all the way around while rotating the pulser.
If the air gap exceeds specification, check for a bent
suspension arm.
Standard:
Front/Rear 0.4 - 1.0 mm (0.02 - 0.04 in)
Front/Rear